Daily Papers

Electricity grid's resiliency and climate change strongly impact one another due to an array of technical and policy-related decisions that impact both. This paper introduces a physics-informed machine learning-based framework to enhance grid's resiliency. Specifically, when encountering disruptive events, this paper designs remedial control actions to prevent blackouts. The proposed Physics-Guided Reinforcement Learning (PG-RL) framework determines effective real-time remedial line-switching actions, considering their impact on power balance, system security, and grid reliability. To identify an effective blackout mitigation policy, PG-RL leverages power-flow sensitivity factors to guide the RL exploration during agent training. Comprehensive evaluations using the Grid2Op platform demonstrate that incorporating physical signals into RL significantly improves resource utilization within electric grids and achieves better blackout mitigation policies - both of which are critical in addressing climate change.

Power flow (PF) calculations are the backbone of real-time grid operations, across workflows such as contingency analysis (where repeated PF evaluations assess grid security under outages) and topology optimization (which involves PF-based searches over combinatorially large action spaces). Running these calculations at operational timescales or across large evaluation spaces remains a major computational bottleneck. Additionally, growing uncertainty in power system operations from the integration of renewables and climate-induced extreme weather also calls for tools that can accurately and efficiently simulate a wide range of scenarios and operating conditions. Machine learning methods offer a potential speedup over traditional solvers, but their performance has not been systematically assessed on benchmarks that capture real-world variability. This paper introduces PFΔ, a benchmark dataset for power flow that captures diverse variations in load, generation, and topology. PFΔ contains 859,800 solved power flow instances spanning six different bus system sizes, capturing three types of contingency scenarios (N , N -1, and N -2), and including close-to-infeasible cases near steady-state voltage stability limits. We evaluate traditional solvers and GNN-based methods, highlighting key areas where existing approaches struggle, and identifying open problems for future research. Our dataset is available at https://huggingface.co/datasets/pfdelta/pfdelta/tree/main and our code with data generation scripts and model implementations is at https://github.com/MOSSLab-MIT/pfdelta.

Solving the AC optimal power flow problem (AC-OPF) is critical to the efficient and safe planning and operation of power grids. Small efficiency improvements in this domain have the potential to lead to billions of dollars of cost savings, and significant reductions in emissions from fossil fuel generators. Recent work on data-driven solution methods for AC-OPF shows the potential for large speed improvements compared to traditional solvers; however, no large-scale open datasets for this problem exist. We present the largest readily-available collection of solved AC-OPF problems to date. This collection is orders of magnitude larger than existing readily-available datasets, allowing training of high-capacity data-driven models. Uniquely, it includes topological perturbations - a critical requirement for usage in realistic power grid operations. We hope this resource will spur the community to scale research to larger grid sizes with variable topology.

Foundation models are transforming business workflows and boosting productivity, yet they remain largely absent from engineering domains such as power system analysis, where strict physical consistency must be enforced. We present GENCO (GEometric Neural Corrective Optimizer), a unified neural solver for steady-state transmission grid analysis that handles power flow (PF), optimal power flow (OPF), and state estimation (SE) within a single architecture and shared grid representation. To support advances in neural power system solvers, we introduce the open-source GridFM Development Framework, which standardizes synthetic data generation and training in a low-code environment. We also release large-scale datasets with millions of PF and OPF scenarios across diverse grid topologies to support reproducible benchmarking. We evaluate GENCO on the PFDelta and OPFData benchmarks against state-of-the-art neural solvers and classical solvers, including Newton-Raphson and IPOPT, as well as on real-world Hydro-Québec SCADA data. For large-scale PF, GENCO recovers the full AC operating state, including voltage magnitudes and reactive power that DC-PF cannot provide, while matching DC-PF-level active power-balance residuals. It achieves up to 30x speedups over Newton-Raphson at only 2x the runtime of DC-PF. For OPF, it achieves up to 85x speedups over IPOPT while improving feasibility, optimality, and runtime over DC-OPF. For SE, GENCO is more robust than classical weighted least squares to noisy measurements and grid parameter errors, and always returns a high-quality estimate even when weighted least squares fails to converge. Together, the unified architecture and development framework provide a new approach to large-scale steady-state grid analysis, lowering the barrier to entry for power system engineers and marking a step toward Grid Foundation Models.

High-quality power flow datasets are essential for training machine learning models in power systems. However, security and privacy concerns restrict access to real-world data, making statistically accurate and physically consistent synthetic datasets a viable alternative. We develop a diffusion model for generating synthetic power flow datasets from real-world power grids that both replicate the statistical properties of the real-world data and ensure AC power flow feasibility. To enforce the constraints, we incorporate gradient guidance based on the power flow constraints to steer diffusion sampling toward feasible samples. For computational efficiency, we further leverage insights from the fast decoupled power flow method and propose a variable decoupling strategy for the training and sampling of the diffusion model. These solutions lead to a physics-informed diffusion model, generating power flow datasets that outperform those from the standard diffusion in terms of feasibility and statistical similarity, as shown in experiments across IEEE benchmark systems.

Access to realistic transmission grid models is essential for power systems research, yet detailed network data in the United States remains restricted under critical-infrastructure regulations. We present a pipeline that constructs complete, OPF-solvable transmission network models entirely from publicly available data. The five-stage pipeline (1) extracts power infrastructure from OpenStreetMap via a local Overpass API instance, (2) reconstructs bus-branch topology through voltage inference, line merging, and transformer detection, (3) estimates electrical parameters using voltage-class lookup tables calibrated with U.S. Energy Information Administration (EIA) plant-level data, (4) allocates hourly demand from EIA-930 to individual buses using US Census population as a spatial proxy, and (5) solves both DC and AC optimal power flow using PowerModels.jl with a progressive relaxation strategy that automatically loosens constraints on imprecise models. We validate the pipeline on all 48 contiguous US states and six multi-state regions, including the full Western (5,076 buses) and Eastern (21,697 buses) Interconnections. Of the 48 single-state models, 42 (88%) converge at the strictest relaxation level for AC-OPF at peak hour and 44 (92%) off-peak. Dispatch costs (median $22/MWh) and system losses (median 1.0%) are consistent with real wholesale-market outcomes. The pipeline relies exclusively on open data sources, enabling reproducible grid analysis without proprietary data. All 54 models (48 single-state and 6 multi-state) are publicly released at https://github.com/microsoft/GridSFM.

Public power-system datasets often lack electromagnetic transient (EMT) waveforms, inverter control dynamics, and diverse disturbance coverage, which limits their usefulness for training surrogate models and studying cyber-physical behavior in inverter-based microgrids. This paper presents a high-fidelity digital twin dataset generated from a MATLAB/Simulink EMT model of a low-voltage AC microgrid with ten inverter-based distributed generators. The dataset records synchronized three-phase PCC voltages and currents, per-DG active power, reactive power, and frequency, together with embedded scenario labels, producing 38 aligned channels sampled at Δt = 2~μs over T = 1~s (N = 500{,}001 samples) per scenario. Eleven operating and disturbance scenarios are included: normal operation, load step, voltage sag (temporary three-phase fault), load ramp, frequency ramp, DG trip, tie-line trip, reactive power step, single-line-to-ground faults, measurement noise injection, and communication delay. To ensure numerical stability without altering sequence length, invalid samples (NaN, Inf, and extreme outliers) are repaired using linear interpolation. Each scenario is further validated using system-level evidence from mean frequency, PCC voltage magnitude, total active power, voltage unbalance, and zero-sequence current to confirm physical observability and correct timing. The resulting dataset provides a consistent, labeled EMT benchmark for surrogate modeling, disturbance classification, robustness testing under noise and delay, and cyber-physical resilience analysis in inverter-dominated microgrids. The dataset and processing scripts will be released upon acceptance

This paper revisits the concept of damping torque in a multimachine power system and its relation to the dissipation of oscillation energy in synchronous machine windings. As a multimachine extension of an existing result on a single-machine-infinite-bus (SMIB) system, we show that the total damping power for a mode stemming from the interaction of electromagnetic torques and rotor speeds is equal to the sum of average power dissipations in the generator windings corresponding to the modal oscillation. Further, counter-intuitive to the SMIB result, we demonstrate that, although the equality holds on an aggregate, such is not the case for individual machines in an interconnected system. To that end, distribution factors are derived for expressing the average damping power of each generator as a linear combination of average powers of modal energy dissipation in the windings of all machines in the system. These factors represent the distribution of damping power in a multimachine system. The results are validated on IEEE 4-machine and 16-machine test systems.

Increasing levels of renewable generation motivate a growing interest in data-driven approaches for AC optimal power flow (AC OPF) to manage uncertainty; however, a lack of disciplined dataset creation and benchmarking prohibits useful comparison among approaches in the literature. To instill confidence, models must be able to reliably predict solutions across a wide range of operating conditions. This paper develops the OPF-Learn package for Julia and Python, which uses a computationally efficient approach to create representative datasets that span a wide spectrum of the AC OPF feasible region. Load profiles are uniformly sampled from a convex set that contains the AC OPF feasible set. For each infeasible point found, the convex set is reduced using infeasibility certificates, found by using properties of a relaxed formulation. The framework is shown to generate datasets that are more representative of the entire feasible space versus traditional techniques seen in the literature, improving machine learning model performance.

The DC Optimal Power Flow (DC-OPF) problem is fundamental to power system operations, requiring rapid solutions for real-time grid management. While traditional optimization solvers provide optimal solutions, their computational cost becomes prohibitive for large-scale systems requiring frequent recalculations. Machine learning approaches offer promise for acceleration but often struggle with constraint satisfaction and cost optimality. We present a novel two-stage learning framework that combines physics-informed Graph Neural Networks (GNNs) with Continuous Flow Matching (CFM) for solving DC-OPF problems. Our approach embeds fundamental physical principles--including economic dispatch optimality conditions, Kirchhoff's laws, and Karush-Kuhn-Tucker (KKT) complementarity conditions--directly into the training objectives. The first stage trains a GNN to produce feasible initial solutions by learning from physics-informed losses that encode power system constraints. The second stage employs CFM, a simulation-free continuous normalizing flow technique, to refine these solutions toward optimality through learned vector field regression. Evaluated on the IEEE 30-bus system across five load scenarios ranging from 70\% to 130\% nominal load, our method achieves near-optimal solutions with cost gaps below 0.1\% for nominal loads and below 3\% for extreme conditions, while maintaining 100\% feasibility. Our framework bridges the gap between fast but approximate neural network predictions and optimal but slow numerical solvers, offering a practical solution for modern power systems with high renewable penetration requiring frequent dispatch updates.

AI agents are becoming increasingly capable of generating scientific code, but generating code is not the same as improving the algorithms behind it. For numerical solvers, execution feedback can expose poor performance, but rarely reveals its underlying cause and how to address it. We introduce Auto-Diagnosis and Skill Discovery (ADSD), a framework that links numerical diagnosis to reusable solver self-improvement. ADSD follows a diagnosis-first paradigm that first explains why a solver performs poorly, then uses this diagnosis to guide the discovery of appropriate numerical methods. The resulting knowledge is packaged into reusable solver skills, turning solver improvement from trial-and-error editing into a structured process of diagnosis, discovery, and implementation. Across four challenging numerical domains--power flow equation, AC optimal power flow control, stiff ordinary differential equations, and heterogeneous diffusion PDEs--ADSD consistently improves solver accuracy, robustness, and efficiency. On GOC-500 power flow, for example, ADSD reduces mean solver error by nearly 71times, with improvements further transferring to unseen grid topologies and operating regimes.

Solving the optimal power flow (OPF) problem is a fundamental task to ensure the system efficiency and reliability in real-time electricity grid operations. We develop a new topology-informed graph neural network (GNN) approach for predicting the optimal solutions of real-time ac-OPF problem. To incorporate grid topology to the NN model, the proposed GNN-for-OPF framework innovatively exploits the locality property of locational marginal prices and voltage magnitude. Furthermore, we develop a physics-aware (ac-)flow feasibility regularization approach for general OPF learning. The advantages of our proposed designs include reduced model complexity, improved generalizability and feasibility guarantees. By providing the analytical understanding on the graph subspace stability under grid topology contingency, we show the proposed GNN can quickly adapt to varying grid topology by an efficient re-training strategy. Numerical tests on various test systems of different sizes have validated the prediction accuracy, improved flow feasibility, and topology adaptivity capability of our proposed GNN-based learning framework.

As smart grids (SG) increasingly rely on advanced technologies like sensors and communication systems for efficient energy generation, distribution, and consumption, they become enticing targets for sophisticated cyberattacks. These evolving threats demand robust security measures to maintain the stability and resilience of modern energy systems. While extensive research has been conducted, a comprehensive exploration of proactive cyber defense strategies utilizing Deep Learning (DL) in {SG} remains scarce in the literature. This survey bridges this gap, studying the latest DL techniques for proactive cyber defense. The survey begins with an overview of related works and our distinct contributions, followed by an examination of SG infrastructure. Next, we classify various cyber defense techniques into reactive and proactive categories. A significant focus is placed on DL-enabled proactive defenses, where we provide a comprehensive taxonomy of DL approaches, highlighting their roles and relevance in the proactive security of SG. Subsequently, we analyze the most significant DL-based methods currently in use. Further, we explore Moving Target Defense, a proactive defense strategy, and its interactions with DL methodologies. We then provide an overview of benchmark datasets used in this domain to substantiate the discourse.{ This is followed by a critical discussion on their practical implications and broader impact on cybersecurity in Smart Grids.} The survey finally lists the challenges associated with deploying DL-based security systems within SG, followed by an outlook on future developments in this key field.

Machine Learning (ML) techniques for Optimal Power Flow (OPF) problems have recently garnered significant attention, reflecting a broader trend of leveraging ML to approximate and/or accelerate the resolution of complex optimization problems. These developments are necessitated by the increased volatility and scale in energy production for modern and future grids. However, progress in ML for OPF is hindered by the lack of standardized datasets and evaluation metrics, from generating and solving OPF instances, to training and benchmarking machine learning models. To address this challenge, this paper introduces PGLearn, a comprehensive suite of standardized datasets and evaluation tools for ML and OPF. PGLearn provides datasets that are representative of real-life operating conditions, by explicitly capturing both global and local variability in the data generation, and by, for the first time, including time series data for several large-scale systems. In addition, it supports multiple OPF formulations, including AC, DC, and second-order cone formulations. Standardized datasets are made publicly available to democratize access to this field, reduce the burden of data generation, and enable the fair comparison of various methodologies. PGLearn also includes a robust toolkit for training, evaluating, and benchmarking machine learning models for OPF, with the goal of standardizing performance evaluation across the field. By promoting open, standardized datasets and evaluation metrics, PGLearn aims at democratizing and accelerating research and innovation in machine learning applications for optimal power flow problems. Datasets are available for download at https://www.huggingface.co/PGLearn.

Executable evaluation -- checking the consequences of an agent's actions with a program rather than grading its prose -- has become a prominent way to assess tool-using AI agents in software settings. Electric power engineering has not yet had an analogous benchmark: language-model use is still dominated by retrieval and text question answering, while agents acting on power-system artifacts remain mostly academic prototypes. We introduce the Power Systems Agent Benchmark, an executable benchmark for power-engineering agents. An agent receives a structured task and returns a structured solution; a deterministic evaluator recomputes the engineering quantities, checks operational constraints, and returns a feasibility flag, a normalized score, and explicit violations. The benchmark contains 41 task families across eight areas of power engineering, from power flow and protection to stability, microgrids, reliability, power quality, and forecasting. Each task is grounded in a citable source, standard, or documented engineering formulation. To resist contamination, held-out cases are synthesized on demand by per-family generators from private seeds: the construction is inspectable, but the instances remain private. In a reference evaluation with three command-line agents, the strongest score near the compact tier's ceiling, a smaller open model trails, and public and held-out performance are broadly consistent; a separate public-split grid with OpenCode and Aider probes harness effects. The reference evaluation doubles as quality control: unanimous failures flag candidate task or evaluator defects, and it exposed a latent evaluator bug missed by self-consistency checks. The evaluators are compact deterministic surrogates, but the task contract allows their internals to be upgraded to simulator-backed checks without changing how tasks are posed or solved.

Solving the optimal power flow (OPF) problem in real-time electricity market improves the efficiency and reliability in the integration of low-carbon energy resources into the power grids. To address the scalability and adaptivity issues of existing end-to-end OPF learning solutions, we propose a new graph neural network (GNN) framework for predicting the electricity market prices from solving OPFs. The proposed GNN-for-OPF framework innovatively exploits the locality property of prices and introduces physics-aware regularization, while attaining reduced model complexity and fast adaptivity to varying grid topology. Numerical tests have validated the learning efficiency and adaptivity improvements of our proposed method over existing approaches.

Deep learning (DL) algorithms have been widely applied to short-term voltage stability (STVS) assessment in power systems. However, transferring the knowledge learned in one power grid to other power grids with topology changes is still a challenging task. This paper proposed a transferable DL-based model for STVS assessment by constructing the topology-aware voltage dynamic features from raw PMU data. Since the reactive power flow and grid topology are essential to voltage stability, the topology-aware and physics-informed voltage dynamic features are utilized to effectively represent the topological and temporal patterns from post-disturbance system dynamic trajectories. The proposed DL-based STVS assessment model is tested under random operating conditions on the New England 39-bus system. It has 99.99\% classification accuracy of the short-term voltage stability status using the topology-aware and physics-informed voltage dynamic features. In addition to high accuracy, the experiments show good adaptability to PMU errors. Moreover, The proposed STVS assessment method has outstanding performance on new grid topologies after fine-tuning. In particular, the highest accuracy reaches 99.68\% in evaluation, which demonstrates a good knowledge transfer ability of the proposed model for power grid topology change.

Recently, there has been a growing interest in utilizing machine learning for accurate classification of power quality events (PQEs). However, most of these studies are performed assuming an ideal situation, while in reality, we can have measurement noise, DC offset, and variations in the voltage signal's amplitude and frequency. Building on the prior PQE classification works using deep learning, this paper proposes a deep-learning framework that leverages attention-enabled Transformers as a tool to accurately classify PQEs under the aforementioned considerations. The proposed framework can operate directly on the voltage signals with no need for a separate feature extraction or calculation phase. Our results show that the proposed framework outperforms recently proposed learning-based techniques. It can accurately classify PQEs under the aforementioned conditions with an accuracy varying between 99.81%-91.43% depending on the signal-to-noise ratio, DC offsets, and variations in the signal amplitude and frequency.

The integration of power electronic converters (PECs) and distributed energy resources (DERs) in modern power systems has introduced dynamism and complexity. Accurate simulation becomes essential to comprehend the influence of converter domination on the power grid. This study addresses the fast-switching and stochastic behaviors exhibited by inverter-based resources in converter-dominated power systems, highlighting the necessity for precise analytical models. In the realm of modeling real-world systems, multiple methodologies exist. Notably, black-box and data-driven system identification techniques are employed to construct PEC models using experimental data, without relying on a priori knowledge of the internal system physics. This approach entails a systematic process of model class selection, parameter estimation, and model validation. While a range of linear and nonlinear model structures and estimation algorithms are at our disposal, it remains imperative to harness creativity and a profound understanding of the physical system to craft data-driven models that align seamlessly with their intended applications. These applications may encompass simulation, prediction, control, or fault detection. This report offers valuable insights into the collection of datasets from commercial off-the-shelf inverters, along with the presentation of intricate simulation models.

Unveiling feeder topologies from data is of paramount importance to advance situational awareness and proper utilization of smart resources in power distribution grids. This tutorial summarizes, contrasts, and establishes useful links between recent works on topology identification and detection schemes that have been proposed for power distribution grids. The primary focus is to highlight methods that overcome the limited availability of measurement devices in distribution grids, while enhancing topology estimates using conservation laws of power-flow physics and structural properties of feeders. Grid data from phasor measurement units or smart meters can be collected either passively in the traditional way, or actively, upon actuating grid resources and measuring the feeder's voltage response. Analytical claims on feeder identifiability and detectability are reviewed under disparate meter placement scenarios. Such topology learning claims can be attained exactly or approximately so via algorithmic solutions with various levels of computational complexity, ranging from least-squares fits to convex optimization problems, and from polynomial-time searches over graphs to mixed-integer programs. Although the emphasis is on radial single-phase feeders, extensions to meshed and/or multiphase circuits are sometimes possible and discussed. This tutorial aspires to provide researchers and engineers with knowledge of the current state-of-the-art in tractable distribution grid learning and insights into future directions of work.

We develop a data-driven deep neural operator framework to approximate multiple output states for a diesel engine and generate real-time predictions with reasonable accuracy. As emission norms become more stringent, the need for fast and accurate models that enable analysis of system behavior have become an essential requirement for system development. The fast transient processes involved in the operation of a combustion engine make it difficult to develop accurate physics-based models for such systems. As an alternative to physics based models, we develop an operator-based regression model (DeepONet) to learn the relevant output states for a mean-value gas flow engine model using the engine operating conditions as input variables. We have adopted a mean-value model as a benchmark for comparison, simulated using Simulink. The developed approach necessitates using the initial conditions of the output states to predict the accurate sequence over the temporal domain. To this end, a sequence-to-sequence approach is embedded into the proposed framework. The accuracy of the model is evaluated by comparing the prediction output to ground truth generated from Simulink model. The maximum mathcal L_2 relative error observed was approximately 6.5%. The sensitivity of the DeepONet model is evaluated under simulated noise conditions and the model shows relatively low sensitivity to noise. The uncertainty in model prediction is further assessed by using a mean ensemble approach. The worst-case error at the (mu + 2sigma) boundary was found to be 12%. The proposed framework provides the ability to predict output states in real-time and enables data-driven learning of complex input-output operator mapping. As a result, this model can be applied during initial development stages, where accurate models may not be available.

While the uncertainty in generation and demand increases, accurately estimating the dynamic characteristics of power systems becomes crucial for employing the appropriate control actions to maintain their stability. In our previous work, we have shown that Bayesian Physics-informed Neural Networks (BPINNs) outperform conventional system identification methods in identifying the power system dynamic behavior under measurement noise. This paper takes the next natural step and addresses the more significant challenge, exploring how BPINN perform in estimating power system dynamics under increasing uncertainty from many Inverter-based Resources (IBRs) connected to the grid. These introduce a different type of uncertainty, compared to noisy measurements. The BPINN combines the advantages of Physics-informed Neural Networks (PINNs), such as inverse problem applicability, with Bayesian approaches for uncertainty quantification. We explore the BPINN performance on a wide range of systems, starting from a single machine infinite bus (SMIB) system and 3-bus system to extract important insights, to the 14-bus CIGRE distribution grid, and the large IEEE 118-bus system. We also investigate approaches that can accelerate the BPINN training, such as pretraining and transfer learning. Throughout this paper, we show that in presence of uncertainty, the BPINN achieves orders of magnitude lower errors than the widely popular method for system identification SINDy and significantly lower errors than PINN, while transfer learning helps reduce training time by up to 80 %.

Time-domain simulations are crucial for ensuring power system stability and avoiding critical scenarios that could lead to blackouts. The next-generation power systems require a significant increase in the computational cost and complexity of these simulations due to additional degrees of uncertainty, non-linearity and states. Physics-Informed Neural Networks (PINN) have been shown to accelerate single-component simulations by several orders of magnitude. However, their application to current time-domain simulation solvers has been particularly challenging since the system's dynamics depend on multiple components. Using a new training formulation, this paper introduces the first natural step to integrate PINNs into multi-component time-domain simulations. We propose PINNs as an alternative to other classical numerical methods for individual components. Once trained, these neural networks approximate component dynamics more accurately for longer time steps. Formulated as an implicit and consistent method with the transient simulation workflow, PINNs speed up simulation time by significantly increasing the time steps used. For explanation clarity, we demonstrate the training, integration, and simulation framework for several combinations of PINNs and numerical solution methods using the IEEE 9-bus system, although the method applies equally well to any power system size.

Model predictive control (MPC)-based energy management systems (EMS) are essential for ensuring optimal, secure, and stable operation in microgrids with high penetrations of distributed energy resources. However, due to the high computational cost for the decision-making, the conventional MPC-based EMS typically adopts a simplified integrated-bus power balance model. While this simplification is effective for small networks, large-scale systems require a more detailed branch flow model to account for the increased impact of grid power losses and security constraints. This work proposes an efficient and reliable MPC-based EMS that incorporates power-loss effects and grid-security constraints. %, while adaptively shaping the battery power profile in response to online renewable inputs, achieving reduced operational costs. It enhances system reliability, reduces operational costs, and shows strong potential for online implementation due to its reduced computational effort. Specifically, a second-order cone program (SOCP) branch flow relaxation is integrated into the constraint set, yielding a convex formulation that guarantees globally optimal solutions with high computational efficiency. Owing to the radial topology of the microgrid, this relaxation is practically tight, ensuring equivalence to the original problem. Building on this foundation, an online demand response (DR) module is designed to further reduce the operation cost through peak shaving. To the best of our knowledge, no prior MPC-EMS framework has simultaneously modeled losses and security constraints while coordinating flexible loads within a unified architecture. The developed framework enables secure operation with effective peak shaving and reduced total cost. The effectiveness of the proposed method is validated on 10-bus, 18-bus, and 33-bus systems.

AI inference services -- API subscriptions, enterprise chat tools, and SaaS products with embedded AI features -- fall unambiguously within Scope 3 Category 1 under the Corporate Sustainability Reporting Directive (CSRD), which requires disclosure for fiscal years starting January 2024. Yet no standardised methodology exists for including them in corporate GHG inventories. Current practice either omits the category entirely or applies a generic economic input-output (EEIO) factor calibrated to the ICT sector as a whole, overestimating AI inference emissions by 10-40x relative to physically derived alternatives. We propose a four-tier framework that matches estimation precision to the data organisations can realistically obtain, progressing from direct token-based physical estimation -- using GPU energy benchmarks and regional grid carbon intensities -- down to a spend-based EEIO fallback for services where no usage data exists. Emission factors are derived from peer-reviewed GPU energy benchmarks (ML.ENERGY Leaderboard v3), confirmed grid carbon intensities (EPA eGRID 2023; Ember 2023), and published water use effectiveness data (Li et al., 2025). Applied to a 200-person European firm, the framework yields a total below 1 tCO2e, illustrating that the compliance challenge is methodological rather than magnitude-driven. We further document a water-carbon trade-off that current ESG tools do not surface: Sweden's hydro-dominated grid delivers the lowest carbon intensity in our dataset but the highest water footprint, with direct implications for data centre location strategy.

As energy systems transform to rely on renewable energy and electrification, they encounter stronger year-to-year variability in energy supply and demand. However, most infrastructure planning is based on a single weather year, resulting in a lack of robustness. In this paper, we optimize energy infrastructure for a European energy system designed for net-zero CO_2 emissions in 62 different weather years. Subsequently, we fix the capacity layouts and simulate their operation in every weather year, to evaluate resource adequacy and CO_2 emissions abatement. We show that interannual weather variability causes variation of pm10\% in total system cost. The most expensive capacity layout obtains the lowest net CO_2 emissions but not the highest resource adequacy. Instead, capacity layouts designed with years including compound weather events result in a more robust and cost-effective design. Deploying CO_2-emitting backup generation is a cost-effective robustness measure, which only increase CO_2 emissions marginally as the average CO_2 emissions remain less than 1\% of 1990 levels. Our findings highlight how extreme weather years drive investments in robustness measures, making them compatible with all weather conditions within six decades of historical weather data.

A critical aspect of power systems research is the availability of suitable data, access to which is limited by privacy concerns and the sensitive nature of energy infrastructure. This lack of data, in turn, hinders the development of modern research avenues such as machine learning approaches or stochastic formulations. To overcome this challenge, this paper proposes a systematic, data-driven framework for reconstructing high-fidelity time series, using publicly-available grid snapshots and historical data published by transmission system operators. The proposed approach, from geo-spatial data and generation capacity reconstruction, to time series disaggregation, is applied to the French transmission grid. Thereby, synthetic but highly realistic time series data, spanning multiple years with a 5-minute granularity, is generated at the individual component level.

We explore the possibility to use physics-informed neural networks to drastically accelerate the solution of ordinary differential-algebraic equations that govern the power system dynamics. When it comes to transient stability assessment, the traditionally applied methods either carry a significant computational burden, require model simplifications, or use overly conservative surrogate models. Conventional neural networks can circumvent these limitations but are faced with high demand of high-quality training datasets, while they ignore the underlying governing equations. Physics-informed neural networks are different: they incorporate the power system differential algebraic equations directly into the neural network training and drastically reduce the need for training data. This paper takes a deep dive into the performance of physics-informed neural networks for power system transient stability assessment. Introducing a new neural network training procedure to facilitate a thorough comparison, we explore how physics-informed neural networks compare with conventional differential-algebraic solvers and classical neural networks in terms of computation time, requirements in data, and prediction accuracy. We illustrate the findings on the Kundur two-area system, and assess the opportunities and challenges of physics-informed neural networks to serve as a transient stability analysis tool, highlighting possible pathways to further develop this method.

While the rapid expansion of data centers poses challenges for power grids, it also offers new opportunities as potentially flexible loads. Existing power system research often abstracts data centers as aggregate resources, while computer system research primarily focuses on optimizing GPU energy efficiency and largely ignores the grid impacts of optimized GPU power consumption. To bridge this gap, we develop a GPU-to-Grid framework that couples device-level GPU control with power system objectives. We study distribution-level voltage regulation enabled by flexibility in LLM inference, using batch size as a control knob that trades off the voltage impacts of GPU power consumption against inference latency and token throughput. We first formulate this problem as an optimization problem and then realize it as an online feedback optimization controller that leverages measurements from both the power grid and GPU systems. Our key insight is that reducing GPU power consumption alleviates violations of lower voltage limits, while increasing GPU power mitigates violations near upper voltage limits in distribution systems; this runs counter to the common belief that minimizing GPU power consumption is always beneficial to power grids.

Accurate forecasting of electrical demand is essential for maintaining a stable and reliable power grid, optimizing the allocation of energy resources, and promoting efficient energy consumption practices. This study investigates the effectiveness of five hyperparameter optimization (HPO) algorithms -- Random Search, Covariance Matrix Adaptation Evolution Strategy (CMA--ES), Bayesian Optimization, Partial Swarm Optimization (PSO), and Nevergrad Optimizer (NGOpt) across univariate and multivariate Short-Term Load Forecasting (STLF) tasks. Using the Panama Electricity dataset (n=48,049), we evaluate HPO algorithms' performances on a surrogate forecasting algorithm, XGBoost, in terms of accuracy (i.e., MAPE, R^2) and runtime. Performance plots visualize these metrics across varying sample sizes from 1,000 to 20,000, and Kruskal--Wallis tests assess the statistical significance of the performance differences. Results reveal significant runtime advantages for HPO algorithms over Random Search. In univariate models, Bayesian optimization exhibited the lowest accuracy among the tested methods. This study provides valuable insights for optimizing XGBoost in the STLF context and identifies areas for future research.

Flexible grid topology has become a key enabler of flexibility in modern power grids, particularly for congestion management. Studying the effects of combinatorial topological changes is therefore of significant interest, though it remains computationally intensive in most cases. To address this, we revisit the superposition theorem, which has served as the foundation for the decomposition of numerous power system problems over the past decades, particularly those involving changes in generation and loads. However, its application has traditionally been restricted to fixed grid topologies, breaking down as soon as a topology change occurs. In this paper, we extend the superposition theorem to accommodate varying grid topologies by leveraging well-known distribution factors. This unified framework applies to all types of topological changes, including line disconnection and reconnection, as well as bus splitting and merging. We provide numerical experiments to validate our approach and highlight its advantages in terms of speed-up and interpretability. Finally, we demonstrate its application in two key use cases: remedial action search and updated security analysis following a topological change. Our results show that the proposed approach achieves more than an order-of-magnitude speed-up for real-sized grids compared to the fastest power flow solvers.

This paper proposes a cascading failure mitigation strategy based on Reinforcement Learning (RL). The motivation of the Multi-Stage Cascading Failure (MSCF) problem and its connection with the challenge of climate change are introduced. The bottom-level corrective control of the MCSF problem is formulated based on DCOPF (Direct Current Optimal Power Flow). Then, to mitigate the MSCF issue by a high-level RL-based strategy, physics-informed reward, action, and state are devised. Besides, both shallow and deep neural network architectures are tested. Experiments on the IEEE 118-bus system by the proposed mitigation strategy demonstrate a promising performance in reducing system collapses.

We introduce gridfm-datakit-v1, a Python library for generating realistic and diverse Power Flow (PF) and Optimal Power Flow (OPF) datasets for training Machine Learning (ML) solvers. Existing datasets and libraries face three main challenges: (1) lack of realistic stochastic load and topology perturbations, limiting scenario diversity; (2) PF datasets are restricted to OPF-feasible points, hindering generalization of ML solvers to cases that violate operating limits (e.g., branch overloads or voltage violations); and (3) OPF datasets use fixed generator cost functions, limiting generalization across varying costs. gridfm-datakit addresses these challenges by: (1) combining global load scaling from real-world profiles with localized noise and supporting arbitrary N-k topology perturbations to create diverse yet realistic datasets; (2) generating PF samples beyond operating limits; and (3) producing OPF data with varying generator costs. It also scales efficiently to large grids (up to 10,000 buses). Comparisons with OPFData, OPF-Learn, PGLearn, and PFΔ are provided. Available on GitHub at https://github.com/gridfm/gridfm-datakit under Apache 2.0 and via `pip install gridfm-datakit`.

Modern power systems require fast and accurate dynamic simulations for stability assessment, digital twins, and real-time control, but classical ODE solvers are often too slow for large-scale or online applications. We propose a neural-operator framework for surrogate modeling of power system components, using Deep Operator Networks (DeepONets) to learn mappings from system states and time-varying inputs to full trajectories without step-by-step integration. To enhance generalization and data efficiency, we introduce Physics-Informed DeepONets (PI-DeepONets), which embed the residuals of governing equations into the training loss. Our results show that DeepONets, and especially PI-DeepONets, achieve accurate predictions under diverse scenarios, providing over 30 times speedup compared to high-order ODE solvers. Benchmarking against Physics-Informed Neural Networks (PINNs) highlights superior stability and scalability. Our results demonstrate neural operators as a promising path toward real-time, physics-aware simulation of power system dynamics.

Electricity price forecasting in Europe presents unique challenges due to the continent's increasingly integrated and physically interconnected power market. While recent advances in foundation models have led to substantial improvements in general time series forecasting, most existing approaches do not incorporate prior graph knowledge from the transmission topology, which can limit their ability to exploit meaningful cross-region dependencies in interconnected power systems, motivating a domain-specific foundation model. In this paper, we address this gap by first introducing a comprehensive and up-to-date dataset across 24 European countries (38 regions), spanning from 2022-01-01 to 2026-01-01. Building on this groundwork, we propose PriceFM, a probabilistic foundation model pretrained on this large dataset. Specifically, PriceFM maps each region's price and exogenous features into a comparable latent embedding via a shared Mixture-of-Experts (MoE) projection layer, then injects prior graph knowledge by constructing a sparse graph mask derived from transmission topology. Across a large-scale European benchmark, PriceFM achieves strong performance and demonstrates superior generalization under both zero-shot and full-shot evaluation compared with multiple competitive baselines.

Accurate net load forecasting is vital for energy planning, aiding decisions on trade and load distribution. However, assessing the performance of forecasting models across diverse input variables, like temperature and humidity, remains challenging, particularly for eliciting a high degree of trust in the model outcomes. In this context, there is a growing need for data-driven technological interventions to aid scientists in comprehending how models react to both noisy and clean input variables, thus shedding light on complex behaviors and fostering confidence in the outcomes. In this paper, we present Forte, a visual analytics-based application to explore deep probabilistic net load forecasting models across various input variables and understand the error rates for different scenarios. With carefully designed visual interventions, this web-based interface empowers scientists to derive insights about model performance by simulating diverse scenarios, facilitating an informed decision-making process. We discuss observations made using Forte and demonstrate the effectiveness of visualization techniques to provide valuable insights into the correlation between weather inputs and net load forecasts, ultimately advancing grid capabilities by improving trust in forecasting models.

We present the PowerGridworld software package to provide users with a lightweight, modular, and customizable framework for creating power-systems-focused, multi-agent Gym environments that readily integrate with existing training frameworks for reinforcement learning (RL). Although many frameworks exist for training multi-agent RL (MARL) policies, none can rapidly prototype and develop the environments themselves, especially in the context of heterogeneous (composite, multi-device) power systems where power flow solutions are required to define grid-level variables and costs. PowerGridworld is an open-source software package that helps to fill this gap. To highlight PowerGridworld's key features, we present two case studies and demonstrate learning MARL policies using both OpenAI's multi-agent deep deterministic policy gradient (MADDPG) and RLLib's proximal policy optimization (PPO) algorithms. In both cases, at least some subset of agents incorporates elements of the power flow solution at each time step as part of their reward (negative cost) structures.

We consider the relationship between Eulerian modal decompositions and Lagrangian coherent structures (LCSs). The model sensitivity framework developed by Kaszás and Haller (2020) is used to express data-driven modal representations of fluid flow in a Lagrangian space. The method, based on the computation of the finite-time Lyapunov exponent, computes the amplitude perturbations experienced by fluid particles due to specific modal components of the flow. Demonstrations of the method are presented for both periodic and turbulent flows, including experimental data from the wake past an oscillating foil, numerical data of the classical cylinder wake flow, and a direct numerical simulation (DNS) of a turbulent channel flow. This method provides a way to understand how Eulerian mode structures interact dynamically with features of the Lagrangian coherent structure across scales, offering additional physical insight into modal decompositions.

Components of cyber physical systems, which affect real-world processes, are often exposed to the internet. Replacing conventional control methods with Deep Reinforcement Learning (DRL) in energy systems is an active area of research, as these systems become increasingly complex with the advent of renewable energy sources and the desire to improve their efficiency. Artificial Neural Networks (ANN) are vulnerable to specific perturbations of their inputs or features, called adversarial examples. These perturbations are difficult to detect when properly regularized, but have significant effects on the ANN's output. Because DRL uses ANN to map optimal actions to observations, they are similarly vulnerable to adversarial examples. This work proposes a novel attack technique for continuous control using Group Difference Logits loss with a bifurcation layer. By combining aspects of targeted and untargeted attacks, the attack significantly increases the impact compared to an untargeted attack, with drastically smaller distortions than an optimally targeted attack. We demonstrate the impacts of powerful gradient-based attacks in a realistic smart energy environment, show how the impacts change with different DRL agents and training procedures, and use statistical and time-series analysis to evaluate attacks' stealth. The results show that adversarial attacks can have significant impacts on DRL controllers, and constraining an attack's perturbations makes it difficult to detect. However, certain DRL architectures are far more robust, and robust training methods can further reduce the impact.

Large language models (LLMs) have demonstrated remarkable tool-use capabilities, yet their application to power system operations remains largely unexplored. This paper presents Grid-Mind, a domain-specific LLM agent that interprets natural-language interconnection requests and autonomously orchestrates multi-fidelity power system simulations. The LLM-first architecture positions the language model as the central decision-making entity, employing an eleven-tool registry to execute Connection Impact Assessment (CIA) studies spanning steadystate power flow, N-1 contingency analysis, transient stability, and electromagnetic transient screening. A violation inspector grounds every decision in quantitative simulation outputs, while a three-layer anti-hallucination defence mitigates numerical fabrication risk through forced capacity-tool routing and post-response grounding validation. A prompt-level self-correction mechanism extracts distilled lessons from agent failures, yielding progressive accuracy improvements without model retraining. End-to-end evaluation on 50 IEEE 118-bus scenarios (DeepSeek-V3, 2026-02-23) achieved 84.0% tool-selection accuracy and 100% parsing accuracy. A separate 56-scenario self-correction suite passed 49 of 56 cases (87.5%) with a mean score of 89.3. These results establish a reproducible baseline for continued refinement while maintaining auditable, simulation-grounded decision support.

Accurate forecasts for day-ahead photovoltaic (PV) power generation are crucial to support a high PV penetration rate in the local electricity grid and to assure stability in the grid. We use state-of-the-art tree-based machine learning methods to produce such forecasts and, unlike previous studies, we hereby account for (i) the effects various meteorological as well as astronomical features have on PV power production, and this (ii) at coarse as well as granular spatial locations. To this end, we use data from Belgium and forecast day-ahead PV power production at an hourly resolution. The insights from our study can assist utilities, decision-makers, and other stakeholders in optimizing grid operations, economic dispatch, and in facilitating the integration of distributed PV power into the electricity grid.

The variability of wind power supply can present substantial challenges to incorporating wind power into a grid system. Thus, Wind Power Forecasting (WPF) has been widely recognized as one of the most critical issues in wind power integration and operation. There has been an explosion of studies on wind power forecasting problems in the past decades. Nevertheless, how to well handle the WPF problem is still challenging, since high prediction accuracy is always demanded to ensure grid stability and security of supply. We present a unique Spatial Dynamic Wind Power Forecasting dataset: SDWPF, which includes the spatial distribution of wind turbines, as well as the dynamic context factors. Whereas, most of the existing datasets have only a small number of wind turbines without knowing the locations and context information of wind turbines at a fine-grained time scale. By contrast, SDWPF provides the wind power data of 134 wind turbines from a wind farm over half a year with their relative positions and internal statuses. We use this dataset to launch the Baidu KDD Cup 2022 to examine the limit of current WPF solutions. The dataset is released at https://aistudio.baidu.com/aistudio/competition/detail/152/0/datasets.

Accurate electricity load forecasting is essential for grid stability, resource optimization, and renewable energy integration. While transformer-based deep learning models like TimeGPT have gained traction in time-series forecasting, their effectiveness in long-term electricity load prediction remains uncertain. This study evaluates forecasting models ranging from classical regression techniques to advanced deep learning architectures using data from the ESD 2025 competition. The dataset includes two years of historical electricity load data, alongside temperature and global horizontal irradiance (GHI) across five sites, with a one-day-ahead forecasting horizon. Since actual test set load values remain undisclosed, leveraging predicted values would accumulate errors, making this a long-term forecasting challenge. We employ (i) Principal Component Analysis (PCA) for dimensionality reduction and (ii) frame the task as a regression problem, using temperature and GHI as covariates to predict load for each hour, (iii) ultimately stacking 24 models to generate yearly forecasts. Our results reveal that deep learning models, including TimeGPT, fail to consistently outperform simpler statistical and machine learning approaches due to the limited availability of training data and exogenous variables. In contrast, XGBoost, with minimal feature engineering, delivers the lowest error rates across all test cases while maintaining computational efficiency. This highlights the limitations of deep learning in long-term electricity forecasting and reinforces the importance of model selection based on dataset characteristics rather than complexity. Our study provides insights into practical forecasting applications and contributes to the ongoing discussion on the trade-offs between traditional and modern forecasting methods.

Photovoltaic (PV) power forecasting plays a crucial role in optimizing the operation and planning of PV systems, thereby enabling efficient energy management and grid integration. However, un certainties caused by fluctuating weather conditions and complex interactions between different variables pose significant challenges to accurate PV power forecasting. In this study, we propose PV-Client (Cross-variable Linear Integrated ENhanced Transformer for Photovoltaic power forecasting) to address these challenges and enhance PV power forecasting accuracy. PV-Client employs an ENhanced Transformer module to capture complex interactions of various features in PV systems, and utilizes a linear module to learn trend information in PV power. Diverging from conventional time series-based Transformer models that use cross-time Attention to learn dependencies between different time steps, the Enhanced Transformer module integrates cross-variable Attention to capture dependencies between PV power and weather factors. Furthermore, PV-Client streamlines the embedding and position encoding layers by replacing the Decoder module with a projection layer. Experimental results on three real-world PV power datasets affirm PV-Client's state-of-the-art (SOTA) performance in PV power forecasting. Specifically, PV-Client surpasses the second-best model GRU by 5.3% in MSE metrics and 0.9% in accuracy metrics at the Jingang Station. Similarly, PV-Client outperforms the second-best model SVR by 10.1% in MSE metrics and 0.2% in accuracy metrics at the Xinqingnian Station, and PV-Client exhibits superior performance compared to the second-best model SVR with enhancements of 3.4% in MSE metrics and 0.9% in accuracy metrics at the Hongxing Station.

Range anxiety is a major concern of battery electric vehicles (BEVs) users or potential users. Previous work has explored the influential factors of distance-related range anxiety. However, time-related range anxiety has rarely been explored. The time cost when charging or waiting to charge the BEVs can negatively impact BEV users' experience. As a preliminary attempt, this survey study investigated time-related anxiety by observing BEV users' charging decisions in scenarios when both battery level and time cost are of concern. We collected and analyzed responses from 217 BEV users in mainland China. The results revealed that time-related anxiety exists and could affect users' charging decisions. Further, users' charging decisions can be a result of the trade-off between distance-related and time-related anxiety, and can be moderated by several external factors (e.g., regions and individual differences). The findings can support the optimization of charge station distribution and EV charge recommendation algorithms.

Driven by advancements in sensing and computing, deep reinforcement learning (DRL)-based methods have demonstrated significant potential in effectively tackling distribution system restoration (DSR) challenges under uncertain operational scenarios. However, the data-intensive nature of DRL poses obstacles in achieving satisfactory DSR solutions for large-scale, complex distribution systems. Inspired by the transformative impact of emerging foundation models, including large language models (LLMs), across various domains, this paper explores an innovative approach harnessing LLMs' powerful computing capabilities to address scalability challenges inherent in conventional DRL methods for solving DSR. To our knowledge, this study represents the first exploration of foundation models, including LLMs, in revolutionizing conventional DRL applications in power system operations. Our contributions are twofold: 1) introducing a novel LLM-powered Physics-Informed Decision Transformer (PIDT) framework that leverages LLMs to transform conventional DRL methods for DSR operations, and 2) conducting comparative studies to assess the performance of the proposed LLM-powered PIDT framework at its initial development stage for solving DSR problems. While our primary focus in this paper is on DSR operations, the proposed PIDT framework can be generalized to optimize sequential decision-making across various power system operations.

With the rapid development of global industrial production, the demand for reliability in power equipment has been continuously increasing. Ensuring the stability of power system operations requires accurate methods to detect potential faults in power equipment, thereby guaranteeing the normal supply of electrical energy. In this article, the performance of YOLOv5, YOLOv8, YOLOv9, YOLOv10, and the state-of-the-art YOLOv11 methods was comprehensively evaluated for power equipment object detection. Experimental results demonstrate that the mean average precision (mAP) on a public dataset for power equipment was 54.4%, 55.5%, 43.8%, 48.0%, and 57.2%, respectively, with the YOLOv11 achieving the highest detection performance. Moreover, the YOLOv11 outperformed other methods in terms of recall rate and exhibited superior performance in reducing false detections. In conclusion, the findings indicate that the YOLOv11 model provides a reliable and effective solution for power equipment object detection, representing a promising approach to enhancing the operational reliability of power systems.

Multivariate probabilistic time series forecasts are commonly evaluated via proper scoring rules, i.e., functions that are minimal in expectation for the ground-truth distribution. However, this property is not sufficient to guarantee good discrimination in the non-asymptotic regime. In this paper, we provide the first systematic finite-sample study of proper scoring rules for time-series forecasting evaluation. Through a power analysis, we identify the "region of reliability" of a scoring rule, i.e., the set of practical conditions where it can be relied on to identify forecasting errors. We carry out our analysis on a comprehensive synthetic benchmark, specifically designed to test several key discrepancies between ground-truth and forecast distributions, and we gauge the generalizability of our findings to real-world tasks with an application to an electricity production problem. Our results reveal critical shortcomings in the evaluation of multivariate probabilistic forecasts as commonly performed in the literature.

The undergoing energy transition is causing behavioral changes in electricity use, e.g. with self-consumption of local generation, or flexibility services for demand control. To better understand these changes and the challenges they induce, accessing individual smart meter data is crucial. Yet this is personal data under the European GDPR. A widespread use of such data requires thus to create synthetic realistic and privacy-preserving samples. This paper introduces a new synthetic load curve dataset generated by conditional latent diffusion. We also provide the contracted power, time-of-use plan and local temperature used for generation. Fidelity, utility and privacy of the dataset are thoroughly evaluated, demonstrating its good quality and thereby supporting its interest for energy modeling applications.

Many smart grid applications involve data mining, clustering, classification, identification, and anomaly detection, among others. These applications primarily depend on the measurement of similarity, which is the distance between different time series or subsequences of a time series. The commonly used time series distance measures, namely Euclidean Distance (ED) and Dynamic Time Warping (DTW), do not quantify the flexible nature of electricity usage data in terms of temporal dynamics. As a result, there is a need for a new distance measure that can quantify both the amplitude and temporal changes of electricity time series for smart grid applications, e.g., demand response and load profiling. This paper introduces a novel distance measure to compare electricity usage patterns. The method consists of two phases that quantify the effort required to reshape one time series into another, considering both amplitude and temporal changes. The proposed method is evaluated against ED and DTW using real-world data in three smart grid applications. Overall, the proposed measure outperforms ED and DTW in accurately identifying the best load scheduling strategy, anomalous days with irregular electricity usage, and determining electricity users' behind-the-meter (BTM) equipment.

Hydropower plants are crucial for stable renewable energy and serve as vital water sources for sustainable agriculture. However, it is essential to assess the current water management practices associated with hydropower plant management software. A key concern is the potential conflict between electricity generation and agricultural water needs. Prioritising water for electricity generation can reduce irrigation availability in agriculture during crucial periods like droughts, impacting crop yields and regional food security. Coordination between electricity and agricultural water allocation is necessary to ensure optimal and environmentally sound practices. Neural networks have become valuable tools for hydropower plant management, but their black-box nature raises concerns about transparency in decision making. Additionally, current approaches often do not take advantage of their potential to create a system that effectively balances water allocation. This work is a call for attention and highlights the potential risks of deploying neural network-based hydropower plant management software without proper scrutiny and control. To address these concerns, we propose the adoption of the Agriculture Conscious Hydropower Plant Management framework, aiming to maximise electricity production while prioritising stable irrigation for agriculture. We also advocate reevaluating government-imposed minimum water guidelines for irrigation to ensure flexibility and effective water allocation. Additionally, we suggest a set of regulatory measures to promote model transparency and robustness, certifying software that makes conscious and intelligent water allocation decisions, ultimately safeguarding agriculture from undue strain during droughts.

This paper introduces a novel learning-based Stochastic Hybrid System (LSHS) approach for detecting and classifying various contingencies in modern power systems. Specifically, the proposed method is capable of identifying hidden contingencies that cannot be captured by existing sensing and monitoring systems, such as failures in protection systems or line outages in distribution networks. The LSHS approach detects contingencies by analyzing system outputs and behaviors. It then categorizes them based on their impact on the SHS model into physical, control network, and measurement contingencies. The stochastic hybrid system (SHS) model is further extended into an advanced closed-loop framework incorporating both system dynamics and observer-based state estimation error dynamics. Machine learning methods within the LSHS framework are employed for contingency classification and rapid detection. The practicality and effectiveness of the proposed methodology are validated through simulations on an enhanced IEEE-33 bus system. The results demonstrate that the LSHS framework significantly improves the accuracy and speed of contingency detection compared to state-of-the-art methods, offering a promising solution for enhancing power system contingency detection.

Accurate household electricity short-term load forecasting (STLF) is key to future and sustainable energy systems. While various studies have analyzed statistical, machine learning, or deep learning approaches for household electricity STLF, recently proposed time series foundation models such as Chronos, TimesFM or Time-MoE promise a new approach for household electricity STLF. These models are trained on a vast amount of time series data and are able to forecast time series without explicit task-specific training (zero-shot learning). In this study, we benchmark the forecasting capabilities of time series foundation models compared to Trained-from-Scratch (TFS) Transformer-based approaches. Our results suggest that foundation models perform comparably to TFS Transformer models, while certain time series foundation models outperform all TFS models when the input size increases. At the same time, they require less effort, as they need no domain-specific training and only limited contextual data for inference.

Bridge scour is a complex phenomenon combining hydrological, geotechnical and structural processes. Bridge scour is the leading cause of bridge collapse, which can bring catastrophic consequences including the loss of life. Estimating scour on bridges is an important task for engineers assessing bridge system performance. Overestimation of scour depths during design may lead to excess spendings on construction whereas underestimation can lead to the collapse of a bridge. Many empirical equations have been developed over the years to assess scour depth at bridge piers. These equations have only been calibrated with laboratory data or very few field data. This paper compares eight equations including the UK CIRIA C742 approach to establish their accuracy using the open access USGS pier-scour database for both field and laboratory conditions. A one-at-the-time sensitivity assessment and a global sensitivity analysis were then applied to identify the most significant parameters in the eight scour equations. The paper shows that using a global approach, i.e. one where all parameters are varied simultaneously, provides more insights than a traditional one-at-the-time approach. The main findings are that the CIRIA and Froehlich equations are the most accurate equations for field conditions, and that angle of attack, pier shape and the approach flow depth are the most influential parameters. Efforts to reduce uncertainty of these three parameters would maximise increase of scour estimate precision.

Price responsiveness is a major feature of end use customers (EUCs) that participate in demand response (DR) programs, and has been conventionally modeled with static demand functions, which take the electricity price as the input and the aggregate energy consumption as the output. This, however, neglects the inherent temporal correlation of the EUC behaviors, and may result in large errors when predicting the actual responses of EUCs in real-time pricing (RTP) programs. In this paper, we propose a dynamical DR model so as to capture the temporal behavior of the EUCs. The states in the proposed dynamical DR model can be explicitly chosen, in which case the model can be represented by a linear function or a multi-layer feedforward neural network, or implicitly chosen, in which case the model can be represented by a recurrent neural network or a long short-term memory unit network. In both cases, the dynamical DR model can be learned from historical price and energy consumption data. Numerical simulation illustrated how the states are chosen and also showed the proposed dynamical DR model significantly outperforms the static ones.

Evaluations of LLM planning agents largely ask whether a task succeeds or a declared plan is followed. In strategic cyber-physical systems, a stronger question is whether the planning architecture remains appropriate after autonomous participants respond and physics constrains the outcome. We introduce a controlled, physics-grounded benchmark built around planning-induced control trajectories: the ordered planning operations and directives through which an execution architecture acts on other agents and the physical process. It implements predefined, sequential, hierarchical, and search executors in a smart-grid demand-response system with 40 heterogeneous prosumers and an independently simulated radial feeder. The LLM is bounded to typed policy declaration and short operator messages, while schedule construction, prosumer dynamics, and power flow remain explicit code. The protocol uses paired forced-mode counterfactuals, common random response draws, and event-level deadline feasibility. Three properties follow. Architecture materially changes outcomes: forced search is the oracle in all five baseline seeds. Execution fidelity needs more than mode agreement: objective substitution holds agreement at 1.0 while increasing voltage shortfall by 2.68x. A 144-scenario, 576-episode bank has feasible oracles from three of the four architectures. A prespecified stress-held-out ridge has mean regret 90.7 (95% interval [73.8, 108.6]) and no detectable value over fixed sequential; applying known deadline feasibility before quality prediction cuts regret to 29.0 and improves over fixed sequential by 61.1. An all-feasible ablation does not beat fixed search, localising the remaining challenge to within-feasible quality selection. A five-model extension separates stress-conditioned, state-blind, and invariant declarers; latency tails show that live feasibility should be treated probabilistically.

This paper introduces a framework specifically designed for sparse and irregular time series {risk estimation}. It is based on a Transformer Autoencoder with local attention, which leverages the powerful pattern identification capabilities of transformers complemented by traditional data cleaning and normalization methods. It efficiently captures relevant patterns within irregular sequences suffering from sparse data collection, benefiting from the discriminative ability of the local attention mechanism. The proposed framework is applied to a real-world case study, on the risk estimation of non-technical losses in electrical power systems in a wide area in Greece. Non-technical losses in electrical power systems, primarily stemming from electricity theft, pose significant economic and operational challenges. Detecting these anomalies is particularly challenging due to the inherent sparse and irregular nature of real-world data collection practices. Traditional risk estimation methods struggle with effectively capturing long-range dependencies and robustly handling such data characteristics. We demonstrate that our approach effectively yields highly discriminative latent features, which results in more consistent risk estimation compared with existing state-of-the-art and widely used methods. It achieves high recall and precision, meeting the critical objectives of the problem. As such, our solution offers a robust and effective tool for risk detection in irregular time series datasets.

From an environmental standpoint, there are a few crucial aspects of training a neural network that have a major impact on the quantity of carbon that it emits. These factors include: the location of the server used for training and the energy grid that it uses, the length of the training procedure, and even the make and model of hardware on which the training takes place. In order to approximate these emissions, we present our Machine Learning Emissions Calculator, a tool for our community to better understand the environmental impact of training ML models. We accompany this tool with an explanation of the factors cited above, as well as concrete actions that individual practitioners and organizations can take to mitigate their carbon emissions.

The precise knowledge regarding the state of the power grid is important in order to ensure optimal and reliable grid operation. Specifically, knowing the state of the distribution grid becomes increasingly important as more renewable energy sources are connected directly into the distribution network, increasing the fluctuations of the injected power. In this paper, we consider the case when the distribution grid becomes partially observable, and the state estimation problem is under-determined. We present a new methodology that leverages a deep neural network (DNN) to estimate the grid state. The standard DNN training method is modified to explicitly incorporate the physical information of the grid topology and line/shunt admittance. We show that our method leads to a superior accuracy of the estimation when compared to the case when no physical information is provided. Finally, we compare the performance of our method to the standard state estimation approach, which is based on the weighted least squares with pseudo-measurements, and show that our method performs significantly better with respect to the estimation accuracy.

Time series foundation models (TSFMs) have shown strong zero-shot forecasting performance, but their generalization in covariate-driven, non-stationary settings is underexplored. Electricity price forecasting (EPF) presents a challenging testbed due to complex temporal dependencies, distributional shifts, and strong reliance on structural and contextual information. We propose a two-dataset-benchmarking framework for EPF to mitigate contamination risk and enable fair evaluation of TSFMs. We examine key aspects of EPF including point and probabilistic forecasting performance, tail behavior, price spikes, and comparisons against domain-specific methods. We find that TSFMs are highly competitive and often outperform general-purpose baselines. Yet, their performance depends critically on covariate support, and they do not consistently surpass domain-specific methods tailored to EPF. Interestingly, simple ensembles of TSFMs and domain-specific methods appear to have significant potential, suggesting that the two approaches capture complementary predictive information.

Transformers achieve state-of-the-art accuracy and robustness across many tasks, but an understanding of the inductive biases that they have and how those biases are different from other neural network architectures remains elusive. Various neural network architectures such as fully connected networks have been found to have a simplicity bias towards simple functions of the data; one version of this simplicity bias is a spectral bias to learn simple functions in the Fourier space. In this work, we identify the notion of sensitivity of the model to random changes in the input as a notion of simplicity bias which provides a unified metric to explain the simplicity and spectral bias of transformers across different data modalities. We show that transformers have lower sensitivity than alternative architectures, such as LSTMs, MLPs and CNNs, across both vision and language tasks. We also show that low-sensitivity bias correlates with improved robustness; furthermore, it can also be used as an efficient intervention to further improve the robustness of transformers.

Excluding irrelevant features in a pattern recognition task plays an important role in maintaining a simpler machine learning model and optimizing the computational efficiency. Nowadays with the rise of large scale datasets, feature selection is in great demand as it becomes a central issue when facing high-dimensional datasets. The present study provides a new measure of saliency for features by employing a Sensitivity Analysis (SA) technique called the extended Fourier amplitude sensitivity test, and a well-trained Feedforward Neural Network (FNN) model, which ultimately leads to the selection of a promising optimal feature subset. Ideas of the paper are mainly demonstrated based on adopting FNN model for feature selection in classification problems. But in the end, a generalization framework is discussed in order to give insights into the usage in regression problems as well as expressing how other function approximate models can be deployed. Effectiveness of the proposed method is verified by result analysis and data visualization for a series of experiments over several well-known datasets drawn from UCI machine learning repository.

Hydrogen-electrical microgrids are increasingly assuming an important role on the pathway toward decarbonization of energy and transportation systems. This paper studies networked hydrogen-electrical microgrids planning (NHEMP), considering a critical but often-overlooked issue, i.e., the demand-inducing effect (DIE) associated with infrastructure development decisions. Specifically, higher refueling capacities will attract more refueling demand of hydrogen-powered vehicles (HVs). To capture such interactions between investment decisions and induced refueling demand, we introduce a decision-dependent uncertainty (DDU) set and build a trilevel stochastic-robust formulation. The upper-level determines optimal investment strategies for hydrogen-electrical microgrids, the lower-level optimizes the risk-aware operation schedules across a series of stochastic scenarios, and, for each scenario, the middle-level identifies the "worst" situation of refueling demand within an individual DDU set to ensure economic feasibility. Then, an adaptive and exact decomposition algorithm, based on Parametric Column-and-Constraint Generation (PC&CG), is customized and developed to address the computational challenge and to quantitatively analyze the impact of DIE. Case studies on an IEEE exemplary system validate the effectiveness of the proposed NHEMP model and the PC&CG algorithm. It is worth highlighting that DIE can make an important contribution to the economic benefits of NHEMP, yet its significance will gradually decrease when the main bottleneck transits to other system restrictions.

Time domain simulation, i.e., modeling the system's evolution over time, is a crucial tool for studying and enhancing power system stability and dynamic performance. However, these simulations become computationally intractable for renewable-penetrated grids, due to the small simulation time step required to capture renewable energy resources' ultra-fast dynamic phenomena in the range of 1-50 microseconds. This creates a critical need for solutions that are both fast and scalable, posing a major barrier for the stable integration of renewable energy resources and thus climate change mitigation. This paper explores operator learning, a family of machine learning methods that learn mappings between functions, as a surrogate model for these costly simulations. The paper investigates, for the first time, the fundamental concept of simulation time step-invariance, which enables models trained on coarse time steps to generalize to fine-resolution dynamics. Three operator learning methods are benchmarked on a simple test system that, while not incorporating practical complexities of renewable-penetrated grids, serves as a first proof-of-concept to demonstrate the viability of time step-invariance. Models are evaluated on (i) zero-shot super-resolution, where training is performed on a coarse simulation time step and inference is performed at super-resolution, and (ii) generalization between stable and unstable dynamic regimes. This work addresses a key challenge in the integration of renewable energy for the mitigation of climate change by benchmarking operator learning methods to model physical systems.